Welcome to 60230 Remote Control Setup guide!

Effortlessly control your window treatments with our easy-to-use remote control system. This guide will walk you through the steps to set up, program, and customize your remote control, ensuring seamless operation and convenience.

📑To see more videos, visit our YouTube channel.

If you have any issues with your remote control, please follow the steps below.

16-channel remote (60230)  

• 61007 BLE RF Motor 
• 60168/ 60174/ 61006 Zigbee Alexa Motor
• 61008 YK Matter Motor 
• 60170 / 60175 / 61010 Hardwired Motor
• 60132 Hardwired Motor (low voltage)

Reference document No.58524

1. Press < or > numbers to choose the channel number you want, and hold T button on the back for 6s. Then the ☀ icon will show up on the screen. (Page 33)
2. Go to the blind and you will find the reset button beside the charging port. Hold it until the blind jogs 4 times.(Page 42)Hold the button again until the blind jogs 1 time to wake up the motor. (Page 31)    
3. Thereafter, we need to re-pair the motor to the remote. Hold the reset button until the motor jogs 1 time. Press the P button on the back of the remote and the blind will jog twice. (Page 43). After these steps, the remote is paired to the motor.
4. can use the dot up and dot down buttons to test the direction. After you press them, the blind will move a little bit, and you can tell if the direction is correct or not. If the direction is wrong, please press down and the dot down button together. The blind will jog 1 time. (Page 39)
5. Then we need to set limits. Roll up the blind to the top position you want and stop. Press up and heart button to save the top limit. The blind will jog 1 time. Roll down the blind to the bottom position you want and stop. Press down and heart button to save the bottom limit. The blind will jog 1 time. (Page 41)

 

 

Can't find the answers you're looking for? We're here to help.