Welcome to 60220 Remote Control Setup guide!

Effortlessly control your window treatments with our easy-to-use remote control system. This guide will walk you through the steps to set up, program, and customize your remote control, ensuring seamless operation and convenience.

📑To see more videos, visit our YouTube channel.

If you have any issues with your remote control, please follow the steps below.

1. 15-channel remote (60220)  

• 61007 BLE RF Motor 
• 60168/ 60174/ 61006 Zigbee Alexa Motor
• 60167 HomeKit Motor
• 60177 Zigbee Alexa Motor for Cellular Shades
• 60170 / 60175 / 61010 Hardwired Motor

Reference document No.58514

1. You need press ← or → button to choose a channel number you want. Hold P1 on the back of the remote for 5s and then the channel number will be flashing on the screen. (Page 20)
2. Go to the blind and you will find the reset button beside the charging port. Hold it until the blind jogs 4 times.(Page 31) Hold the button again until the blind jogs 1 time to wake up the motor. (Page 18)
3. Then we need to re-pair the motor to the remote. Hold the reset button until the blind jogs 1 time, then press P2 button on the back of the remote. H1 will show on the screen,and the blind will jog twice. Press P1 and AA shows on the screen. (Page 32)
4. You can use the two function buttons to test the direction. After you press them, the blind will move a little bit, and you can tell if the direction is normal or not. If the direction is wrong, please press the right function button and the down button together to change the direction. (Page 27)
5. Then we need to set limits. Roll up the blind to the top position you want and stop. Press up and heart button to save the top limit. The blind will jog 1 time. Roll down the blind to the bottom position you want and stop. Press down and heart button to save the bottom limit. The blind will jog 1 time. (Page 30)

2. 15-channel remote (60220)  

• 61008 Matter Motor

Reference document No.58514

1. You need press ← or → button to choose a channel number you want. Hold P1 on the back of the remote for 5s and then the channel number will be flashing on the screen. (Page36)
2. Go to the blind and you will find the reset button beside the charging port. Hold it until the blind jogs 4 times. (Page 47) Hold the button again until the blind jogs 1 time to wake up the motor. (Page 34)
3. Then we need to re-pair the motor to the remote. Hold the reset button until the blind jogs 1 time, then press P2 button on the back of the remote. H1 will show on the screen, and the blind will jog twice. Press P1 and AA shows on the screen (Page 48)
4. You can use the two function buttons to test the direction. After you press them, the blind will move a little bit, and you can tell if the direction is normal or not. If the direction is wrong, please press the right function button and the down button together to change the direction. (Page 43)
5. Then we need to set limits. Roll up the blind to the top position you want and stop. Press up and heart button to save the top limit. The blind will jog 1 time. Roll down the blind to the bottom position you want and stop. Press down and heart button to save the bottom limit. The blind will jog 1 time. (Page 46)

 

 

Can't find the answers you're looking for? We're here to help.