Welcome to curtain Remote Control Setup guide!

Effortlessly control your window treatments with our easy-to-use remote control system. This guide will walk you through the steps to set up, program, and customize your remote control, ensuring seamless operation and convenience.

📑To see more videos, visit our YouTube channel.

If you have any issues with your remote control, please follow the steps below.

15-channel remote (60220)

• 60160 Hardwired wifi motor

Reference document No.58506

1. Choose a channel you want on the remote. Remove the back cover of the remote. Hold P1 until the channel number flashes on the screen. (Page 53)
2. Check the butt of the motor and you will find a small reset button. Use a pencil or a needle to hold it 10s. The green light will slowly flash 3 times and quickly flash 5 times. (Page 62)
3. Hold it again until a green light flashes 1 time. Press P2 on the back of the remote twice and “H2” will show up on the screen. The curtain will also open and close 1 time. Press P1 1 time and “AA” will show up on the screen. After all these steps, the motor will be paired with the remote successfully. (Page 63)
4. To set limits, you can press up button and the blind will close first and open. (Page 61)

• 60195 Hardwired wifi motor

Reference document No.58543

1. Choose a channel you want on the remote. Remove the back cover of the remote. Hold P1 until the channel number flashes on the screen. (Page 41)
2. Please check the butt of the motor and you will find a reset button. Use a pencil or a needle to hold it until the red light flashes 10 times. The blind will also jog 1 time. (Page 52)
3. Hold it again until a red light flashes 1 time. (Page 53)
4. Press P2 1 time and “H1” will show on the screen and the blind will jog twice. Press P1 and “AA” will show on the screen. (Page 54)
5. To set limits, you can press up button and the blind will close first and open. (Page 51) 

• 60182 Rechargeable Zibee motor

Reference document No.58543

1. Choose a channel you want on the remote. Remove the back cover of the remote. Hold P1 until the channel number flashes on the screen. (Page 41)
2. Please check the middle of the motor and you will find a reset button. Use a pencil or a needle to hold it until the red light flashes 4 times. The blind will also jog 1 time. (Page 52)
3.  Hold it again until a red light flashes 1 time. (Page 53)
4. Press P2 1 time and “H1” will show on the screen and the blind will jog twice. Press P1 and “AA” will show on the screen. (Page 54)
5. To set limits, you can press up button and the blind will close first and open. (Page 51) 

Can't find the answers you're looking for? We're here to help.